 |
TECHNICAL DATA SHEET |
|
|
Tool number:
A20001-82 |
Revision:
H |
Remark:
- |
Description:
Boom Hoist - General |
| Properties: |
| Length (mm): |
Width (mm):
Diameter (mm): |
Height (mm): |
Mass (kg): |
Number of Parts: |
|
| 1168 |
2337 |
787 |
189 |
1 |
|
| Description of Tool Usage: |
| Hoist is used to remove and install airplane
components. The boom hoist is an upright stand with a welded frame and base. The boom hoist is equipped with casters and a towbar ttachment for mobility. The boom hoist incorporates hand-pumped hydrauliccomponents which control the 180 degree radius of operation of the boom and the 9 foot, 10 inch lift extension. The boom hoist is limited to 400 pound maximum load. |