 |
TECHNICAL DATA SHEET |
|
Tool number:
A27009-7 |
Revision:
A |
Remark:
- |
Description:
Lock, TE Flaps |
| Properties: |
| Length (mm): |
Width (mm):
Diameter (mm): |
Height (mm): |
Mass (kg): |
Number of Parts: |
|
| 196 |
33 |
51 |
0.692 |
1 |
|
| Description of Tool Usage: |
| This tool is a piece of bar stock to which a boss and a spline are welded. These mate to hard points in the Power Drive Unit (PDU) to lock the Trailing Edge (TE) Flaps in extended position for maintenance or in a parked, extended-flap wind load condition. |