 |
TECHNICAL DATA SHEET |
|
|
Tool number:
A32013-1 |
Revision:
A |
Remark:
- |
Description:
Pin Puller, Upper Drag Brace, NLG |
| Properties: |
| Length (mm): |
Width (mm):
Diameter (mm): |
Height (mm): |
Mass (kg): |
Number of Parts: |
|
| 381 |
203 |
152 |
4.5 |
0 |
|
| Description of Tool Usage: |
| This pin puller is used to remove and install two trunnion pins (162T2007-1 and -2) in the upper drag brace of the nose landing gear. A 3/4 inch socket wrench and a 1 3/8 inch open end wrench operate the A32013-12 torquing rod and the A32013-10 puller rod which are threaded through the drag brace onto the mounting pins.
The A32013-3 set assembly is a locator that grips the pin while the A32013-13 bearing pad protects the drag brace surface. The puller assembly is contained in a storage box. |